Ricoh PC Card Controller with Media Card Interface and FireWire ControllerThis is a single chip, offering six PCI functions: CardBus bridge, SDIO/SD Host Controller, MMC plus, Memory Stick PRO, xD-Picture Card, and S400 IEEE 1394a OHCI controller. Features
|
(32 bit) Card Bus tested, ok. (16 bit) PCMCIA not tested.
Modules ohci1394, ieee1394, eth1394 and raw1394 modules loads fine, eth1394 detected as 'eth1' and device /dev/raw1394. Tested with kino and DV-camera - it works.
Worked out-of-the-box using Kubuntu 7.04 (kernel 2.6.20)
Worked with archlinux (kernel 2.6.30) Loaded modules: sdhci ricoh_mmc
Worked with CentOS 5 (2.6.18), but filenames were all uppercase
Worked better with Fedora 7 (2.6.22)
Worked in Gentoo with ricoh_mmc, (mmc_core), sdhci, and sdhci_pci modules
It was developed by Maxim Levitsky and it should work on all notebook with Ricoh R5C592 MS. Download archive, unpack and in terminal in unpacked folder type make;sudo make install;sudo make load
https://bugs.launchpad.net/opensuse/+bug/238208/+attachment/1506369/+files/memstick-v2.tar.bz2
Windows functionality only. No support for xD cards at all.
$ tail -f /var/log/syslog while inserting the card) will only show this line: mmc0: error -110 whilst initialising SD card. This issue is caused by a bad electrical connection, pulling the adapter out a little will solve this in most cases. Permanent fix: use a better adapter.Ricoh R5C843