Engineering Drawing Jobs

lasse ich eine vollständige Dokumentation für den Aufbau einer Druckluft-Bremsanlage anfertigen. Kernaufgaben • Eine professionelle technische Zeichnung, in der Bremszylinder, Druckluftbehälter und Bremsventil eindeutig dargestellt sind. Maßangaben, Materialangaben sowie klare Montagehinweise müssen direkt in der Zeichnung auftauchen, damit mein Werkstattteam unmittelbar damit arbeiten kann. • Ein separates Kapitel, das alle verbauten Bauteile sauber benennt und zuordnet. • Eine verständliche Beschreibung der fünf gängigen Bremsarten. • Eine detaillierte Funktions­beschreibung des Vierkreisschutzventils, inklusive seiner Rolle im Gesamtsystem und der Schritt-für-Schritt-Arbeitsweise. Lieferform PDF oder a...

lasse ich eine vollständige Dokumentation für den Aufbau einer Druckluft-Bremsanlage anfertigen. Kernaufgaben • Eine professionelle technische Zeichnung, in der Bremszylinder, Druckluftbehälter und Bremsventil eindeutig dargestellt sind. Maßangaben, Materialangaben sowie klare Montagehinweise müssen direkt in der Zeichnung auftauchen, damit mein Werkstattteam unmittelbar damit arbeiten kann. • Ein separates Kapitel, das alle verbauten Bauteile sauber benennt und zuordnet. • Eine verständliche Beschreibung der fünf gängigen Bremsarten. • Eine detaillierte Funktions­beschreibung des Vierkreisschutzventils, inklusive seiner Rolle im Gesamtsystem und der Schritt-für-Schritt-Arbeitsweise. Lieferform P...

I need a mechanical design engineer to design a globoidal (Ferguson-type) cam mechanism for a rotary indexing application. The design should be based on the following input parameters, which I will share with the selected freelancer: Index Time Dwell Time Index Frequency Number of Stations Diameter of Plate Weight of Plate Pitch Radius of Station Weight of Each Station Axial Load Scope of Work: Cam profile design/synthesis (motion law selection — e.g., modified sine, modified trapezoidal, or cycloidal, whichever is most suitable) Roller/follower sizing and pressure angle checks Torque, speed, and acceleration calculations based on given load and inertia parameters 3D CAD model of the cam and indexer assembly 2D manufacturing drawings with GD&T Basic design calculation report/...

I need a full set of shop-ready 2D engineering drawings that will let my fabricator build several pieces of clean-room equipment without further clarification. I already have conceptual sketches and performance requirements; what’s missing are precise fabrication documents created in CAD. Scope • Translate my sketches and notes into clear orthographic views, sections and detail call-outs. • Apply industry-standard drawing conventions, complete with dimensions, tolerances, welding symbols and surface-finish indications suitable for stainless-steel fabrication. • Add exploded views or auxiliary details wherever geometry is hard to visualise in 2D alone. • Include a concise bill of materials on each sheet so purchasing can proceed immediately. Deliverables ...

I have a concise, seven-page set of welding shop drawings that now must comply with AWS D1.1 Structural Welding Code. Approximately ten new call-outs are missing—split between standard weld symbols and the appropriate nondestructive examination symbols. Your task is to insert these symbols in the correct locations, update the general notes so the AWS D1.1 reference is unmistakable, and return the file ready for release. Deliverables: • Updated PDF (and native file) with all weld and NDE symbols added • Revised specification page clearly citing AWS D1.1 No extra visual inspections or third-party certifications are required; accuracy to the code is the only benchmark. A quick turnaround is appreciated so the package can move straight to fabrication.

I'm seeking a structural engineer to design my pitched roof for an extension on an existing dwelling.

I need a lead-level hardware systems engineer who is comfortable building around NVIDIA AI modules and can take my concept all the way from schematic to assembled boards. The core task is to design, fabricate, and bring-up custom PCBAs that drive a control system while cleanly interfacing with three sensor classes—temperature sensors, motion detectors, and cameras. Form factor, power budget, and component selection all matter in this build; I already have target size dimensions, allowable power envelope, and a shortlist of preferred parts that we will refine together. Once we lock the architecture you will prepare the complete design package, handle a short prototype run, and validate the hardware with the sensors hooked up. Deliverables • Schematics and PCB layout files &bull...

I'm seeking a detailed design for a general extraction system, following a consultant's site survey and initial proposal. Key Requirements: - Detailed specifications for system layout, duct size, and fan size - Designed for shop extraction use Must be familiar with UK regulations Ideal Skills and Experience: - Expertise in HVAC or industrial extraction systems - Experience with shop or commercial extraction system designs - Ability to provide precise technical specifications Please provide relevant experience in your bids.

I'm looking for an experienced engineer to design a leash dog carabiner. The carabiner will be used primarily for walks and needs to be made of aluminum. Essential features: - Locking mechanism - Lightweight design Ideal skills and experience: - Expertise in materials, especially aluminum - Experience with climbing gear design - Strong understanding of safety and load-bearing requirements Please include your portfolio and relevant experience.

I need a clean, well-organised duct layout in AutoCAD for a commercial ventilation system. You will be working from a detailed floor plan that I will supply as soon as we start, so there is no guess-work on room sizes or equipment locations—just focus on sizing, routing and fitting the ducts efficiently. Please keep everything strictly in 2D and deliver the final DWG with appropriate layers for supply, return, exhaust and any fire/smoke dampers you place. I’ll review the drawing against the floor plan for accuracy of dimensions, clear annotation of duct sizes, and tidy layer management before releasing final approval. I will provide the size of duct at exits from equipment, and you will have to size the ducts (rectangular) for the distribution based of maximum air speed.

Design a Globoidal cam indexing mechanism for an intermittent-motion packaging machine. The mechanism should provide precise indexing with smooth acceleration/deceleration, high positional accuracy, and reliable continuous operation. Deliverables CamTrax64 design/project files Generated globoidal cam profile 3D CAD model of the complete indexing mechanism Manufacturing drawings (if applicable)

I’m taking an oil–water treatment train into detailed engineering and now need a Corrugated Plate Interceptor ready to hit the workshop floor. Starting from the process requirements I’ll share at kickoff, you will turn a performance target into a fully detailed, physically constructible plate pack and the tank with the nozzles according to project requirements. You’ll be responsible for the hydraulic sizing, plate geometry, inclination, spacing, supports, and all integration details, then capturing everything in a clean 3D model and manufacturing package. Practical experience with CPI separators, sheet-metal fabrication and wastewater/process equipment is essential because the final drawings will go straight to a fabricator. Deliverables • Design calculatio...

Part-Time Electrical Distribution Design Engineer (1 Month) We are looking for a motivated Electrical Engineer to join our team on a part-time basis for one month. This is a great opportunity to work on real Australian electricity distribution projects while collaborating with an experienced design team. Scope of Work Prepare overhead and underground electricity distribution designs. Produce high-quality CAD drawings using MicroStation and/or AutoCAD. Assist with electrical network design calculations. Prepare project documentation and design reports. Follow Essential Energy standards and Australian power distribution practices. Communicate with the design team and provide regular progress updates. Requirements Degree or Diploma in Electrical Engineering. Good knowledge of MicroStation a...

I need a centrifugal electric motor pump specifically designed for oil transfer in industrial machinery applications. I need it to fit a 205L oil drum (44 gallon). Dust and water tight screwed into the top of the drum with a rubber seal. A detachable hose with a gun for easy machine servicing. The required flow rate should be low, not exceeding 100 GPM. Key Requirements: - Centrifugal pump design - Electric motor integration - Suitable for oil transfer - Low flow rate capacity (up to 100 GPM) Ideal Skills and Experience: - Mechanical engineering expertise - Experience with pump design and oil transfer systems - Knowledge of electric motor specifications and integration - Background in industrial machinery applications Looking for detailed design and possibly prototype development. Pleas...

I'm looking for an Electrical Engineer to assist with a project for a new 200A commercial panel. Engineer should be familiar with Phoenix AZ and APS requirements. I need: • One-line and riser diagrams • fault-current calculations both of these will need to be stamped by the Engineer. Panel is only used for a courtesy receptacle and security cameras.

A simple steel truss that will sit inside a tower needs to be taken from my finished structural plans into a fully detailed Tekla Structures model. I already hold the complete engineering drawings, so the job is purely detailing—no redesign is required. Because the truss is for a tower (not a roof or bridge), member splice locations, bracing and connection bolts have to respect the tighter erection tolerances typical of vertical structures. What I need from you in Tekla: • 3-D model of the truss with all connections, plates, bolts and welds entered per my drawings • General-arrangement and shop drawings ready for fabrication • Material, bolt and cut lists exported to Excel • NC/IFC files for the fabricator Acceptance criteria • Geometry, member si...

I'm seeking a professional to provide a detailed permit ready framing plan for the ceiling in my garage and perform load calculations for a wooden structural beam in a residential setting in Massachusetts. Requirements: - Permit ready framing plan - Accurate load calculations, including a structural engineering stamp - Consider state-specific building codes - Provide a detailed report Ideal Skills: - Structural engineering expertise - Experience with residential projects - Knowledge of local Massachusetts regulations

I'm seeking an experienced professional to create a Piping and Instrumentation Diagram (P&ID) for a water treatment filtration system, specifically for the filtration system of a water treatment process. Key requirements: - Expertise in P&ID development - Experience with water treatment processes, particularly filtration systems - Understanding of industry standards and regulations - Ability to work with minimal input and provide accurate and detailed diagrams Ideal skills: - Background in chemical engineering or related field - Proficiency in P&ID software tools - Attention to detail and accuracy Please provide relevant experience and examples of similar work.

Ho bisogno di un disegnatore CAD / 3D esperto in modellazione meccanica per realizzare 4 tavole tecniche esecutive in bianco e nero (stile brevettuale) per un manipolo odontoiatrico di profili (Air-Polishing). Il lavoro richiede la modellazione 3D e l'estrazione delle viste in spaccato/dettaglio secondo queste specifiche: Tavola 1: Corpo principale in Ergal (~130-150 mm, Ø 15-20 mm) e dettaglio dell'interfaccia di connessione posteriore universale. Tavola 2: Sede di alloggiamento per capsula monouso con magneti al neodimio e dettaglio dei doppi micro-aghi chirurgici di perforazione. Tavola 3: Spaccato dei condotti interni in acciaio inox e zoom macro dell'ugello terminale con punto di miscelazione esterna (a 0,5 mm). Tavola 4: Sezione della valvola meccanica di si...

Necesito el cálculo estructural completo para un garaje de hormigón adosado a una casa unifamiliar cuyo uso principal será el almacenamiento y no el aparcamiento de vehículos. Alcance solicitado • Memoria de cálculo detallada conforme al CTE y EHE-08 (o normativa equivalente si se justifica), incluyendo combinaciones de carga específicas para un espacio de almacenaje. • Planos estructurales en formato PDF y DWG: cimentación, losa o forjado, pilares, vigas y detalles de armado. • Cuadro de cargas y dimensionamiento de cada elemento, con justificación de flechas, punzonamiento y estabilidad global. • Lista de materiales (hormigón, acero de refuerzo) con especificaciones de resistencia y recubrimient...