The next sections of Netherton to be tackled were all the windows and the roof. There are quite a few windows on this property and as mentioned in a previous post they all had these little overhangs on either side that I didn't like so they got cut off. The astragals were painted, sanded and painted again in white and the edging trim was given the same stone coating as the body of the house.
I wanted to put "metal" grilles on the windows and ordinarily I would have added the black decorative trim that can be cut and fitted and that would be it but having been inspired by Linda Carswell's
Petite Folie weathered railings, I decided to have a go at this technique. This turned out to be a simple task using emulsion paint and a sponge.
Not weathered...............
Weathered.
It makes a difference, doesn't it? The whole effect looks a bit softer, I think. Thank you for that, Linda.
I used two styles of "railings", larger ones as above on the main house windows and smaller ones in the service area in the basement and also on the attic windows.
The next alteration I made was to the attic windows. There are five windows up there and originally they fitted flat against the roof but I wasn't so keen on that look so I decided to turn them into dormers.
This was done using foamboard. I cut a template initially just to get the correct angles. They were then all fitted into place and painted with the stone coating
I also added some lead to the flat tops of the windows, down either side and under the roof tiles.
Finally I tackled the roof. It's a pretty large roof and I certainly didn't want any added extra weight (or cost) by using real slate so I opted for card tiles from
Peter Clark These tiles are really easy to work with. They have a shaded finish on one side of A4 card and are marked out in roof tile sizes on the reverse, easily cut with a sharp craft knife and fixed on with pva. The tricky bit was getting the sides to line up so that the tiles ran straight across and round the other side.
A strip of lead along the top to finish off and the roof was done. I didn't put any particular finish on the very top of the roof (I have to stand on a stool to reach that), just a couple of coats of matching grey paint.