Whittingly in print

The July Railway Modeller, which features the new Rapido Manning Wardle on the cover, also includes an article on Whittingly Hospital. The magazine has been following up the Rail200 competition by featuring some of the finalists which were at the National Festival of Railway Modelling at the NEC.

Whittingly is presented in the Micro Marvels feature over four pages, and makes excellent use of the photos that the editor, Craig Tilley, took at the NEC and which show the model really well. I was glad I'd taken some stock along to pose on the layout, as the Peckett and the few wagons do add life to the scene. The lights were still working at that point too, although the batteries expired later that Sunday!

It's great to see the layout in print, but it does remind me of my plan to turn it into a working layout!

Quite by coincidence, the July BRM includes a piece I wrote on building an industrial warehouse using Wills materials. Look familiar?

It was actually quite a simple build and so made a good scratch-building example. Using the Wills industrial windows and brick sheets with the openings ready takes care of the more daunting aspects of modelling buildings. It also shows how scratch-building is the best solution to filling a specific gap.

Of course, if I extend the layout, this low-relief structure will need to be extended!

Manning Wardle L Class

Last week I got a parcel - my Rapido Manning Wardle L-class arrived!

Posed on Loctern Quay it looks great, quirky and characterful like a narrow-gauge loco. However, clearly it's not for Loctern, I ordered it with Whittingham Hospital in mind, so I pulled the diorama out the garage...

The question is, how does it run? Well, Whittingly isn't yet wired up, so some creativity was required. Taking the power supply from Loctern, an adaptor lead for the old club layout, and a pair of crocodile clip wires, I powered up the front track for a short test run. 

It ran very smoothly. The mechanism is a little noisier than most modern mechanism, but not excessively so. Feedback needs to be switched off though!

It's a very small loco, so I thought it worth comparing to other small locos. It's a little longer than the Peckett but not a lot (~6mm), and considerably shorter than a Terrier. I think it will fit in well with the short trains of Whittingly. 

It's barely longer than 4-wheel wagons, and slightly lower than a van. 

It will need a little weathering, but first I just need to crack on with turning Whittingly into a layout!

Whittingly - What next?

Since the Rail200 event at the NEC National Festival or Railway Modelling, Whittingly Hospital has lived in its box in the garage. It was always intended to be the basis of an operational layout, not simply a diorama, so it is time to think about the transition. 

As a reminder, this overhead shot shows the layout as built within the Rail200 rules - which limited not just baseboard size, but overall height and the position of the front, disconnected, through track. The buildings were all constructed to fit within the available footprint and height limit. 

So here is Plan A. This was my original concept. The track layout is modified with a left-hand point by the end of the platform connecting the 3-way point to form a crossover, but otherwise the scenic area is unchanged. I would replace the backscene with a taller one, and add a cameo-style lighting pelmet. 

The key changes would be off-stage. To the left, a short extension gives a little more head shunt room beyond the platform canopy, and lengthens the two sidings through the buildings. On the right, a fiddle yard both provides for a change of train and completes a run-round loop with the 3-way point. I'd sketched a turntable yard, though if that doesn't look like it would work a sector plate would do. A train of 2 6-wheel coaches or 3-4 wagons and loco would be 15-18".

In this plan, the Rail200 challenge entry is kept largely unchanged, which minimises the work involved, and there are no board joins in the scenery. The downside is that only about half the layout length is scenic, shunting will go off-stage, and during key movements such as running around the loco can't be seen. 

Plan B is more ambitious. The extension to the left has become scenic, allowing the loco to be seen beyond the station canopy. A second board to the right provides the rest of the run-round loop and a point "on-stage", as well as the off-stage fiddle yard. This means pretty much all operation will be visible, and makes the scenic length around double that of the fiddle yard. 

The downsides are the complexities of extending the existing buildings. The engine shed would be particularly problematic, as sketched it crosses a board join, but the current structure is well fixed down and has an angled rear that is incomplete. I'm not sure how well the scene on the right-hand board works, messing up the balance of the existing scene without really adding to it. There's also an inconvenient backscene join, and it's harder to store. Finally, the resulting layout has lost the connection to the Rail200 challenge by growing well beyond its original size. While technically better, it would be better not starting from the current layout. 

Let me know what you think!

Rail200 - Whittingly Hospital

My Rail200 challenge entry is finally finished, and the entry submitted with a whole 6 days to spare!

It has a name too - Whittingly Hospital. Since it's inspired by Whittingham and Hellingly Hospitals (amongst others) it's not the most original name, but it seems an appropriate reference to the inspiration.

The composition of the buildings has worked out well, and I'm pleased with how the covered platform has come out. The cinder yard is a little darker than I'd intended, but the buried track is a nice contrast to the ballast.

There's limited scope for details, in photos the prototypes' yards seem to be kept tidy and it wouldn't be a place busy with people, so the few figures are placed with apparent purpose. We see the vicar returning from a visit (perhaps a service?) talking to a nurse heading home, and a groundsman taking a break from mowing the extensive parklands...

A sneaky look out from under the canopy works surprisingly well too, revealing figures that aren't easy to see from the front. 

The engine shed provides interest at the opposite end of the scene. Look into the gloom inside the shed and a fitter can be seen.

The pond provides visual interest in the foreground, and was surprisingly easy to do. Perhaps it could do with a duck or two?

Another figure waits in the shadows of the boiler house. 

Another view that can't be seen from the front of the layout. It's unfortunate that the platform couldn't be arranged to face the front, but that's compromise of a micro layout. 

Planning some details

With time to complete the Rail200 challenge running short, I've thought about the details needed to finish it. This pack of benches and luggage trolleys from Shire Scenes will add some interest to the station. They're assembled with superglue, a little fiddly (especially the wheels) but not difficult.

The point levers are also Shire Scenes etched brass, I've had plastic ones before which are vulnerable and easily break so I'm hoping these are a bit more robust. I've made up sleeper extensions and planks to fit them to the ends of the point timbers too. 

I'd found a Knightwing water crane in my stash, it's white-metal and easy to assemble, and has now been painted. I'm not quite sure where to put it...

Option 1 is alongside the engine shed, by what will be the loop track. It's the most logical place as locos can water while running around or during shunting, but a bit close to the hole in the sky, and doesn't stand out well. 

Option 2 is in front of the shed, it's convenient for the sidings and probably the run-round loop as werll as the shed siding. It's a bit tight for space, and up against the open door.

Option 3 is next to the coaling stage, if that is pushed up against the shed doors. It does mean a loco needs to move "on shed" to water. 

Option 4 is next to the weighbridge, at the entrance point to the engine shed. 

Option 5 is at the end of the platform, between the "main" line and the pond. Locos can water while backing onto their train.

Rail200 - buildings finished

The buildings have finally been completed, painted with Vallejo acrylics. The brickwork was painted with my usual technique of picking out a few bricks in different shades to the base red primer, then a coat of mortar colour which is then wiped off in a diagonal direction. I painted the arches, lintel and capping bricks in something approaching "engineering blue" bricks though I'm not sure I got the shade right, the result looks effective though. 

The stores building platform paving has had a few washes over the grey primer, while the "lead" roof is left in primer grey because I couldn't think of a better finish! The doors are closed - actually on double-sided tape so they could be opened up later if needed - and black paper behind the windows hides the lack of depth. The airbrush was used to put smoke stains over the entrance as though locos have lingered there. 

On the boiler house my plan for fixing the doors has actually worked, although they can't be closed because they overlap! I think I'd narrowed the doorway slightly to make the building fit the space and the door to be central to the track, though the doors will never be closed anyway. The metal chimney has come out well with a hint of rust speckles and smoke staining with the airbrush. 

The engine shed roof used the Vallejo "rust and chipping effects" I first tried earlier this year, but this time I airbrushed rather than brush-painted the chipping medium which has given a more effective patchy effect, and "chipped" off the black layer about an hour after applying it. I'm very happy with the result, still not convinced by the vent flues but they look better for being rusty!

Inside, I fitted a yellow LED under the centre brace, and the wiring for that and the front wall lamp runs down inside the far wall. The dirty whitewashed Slater's brick inner false wall works well when viewed through the open doors, while the windows have been smoked with the airbrush. Oh, and look - the doors actually close!

The canopy was airbrushed green for a neat finish then given a dirty wash to emphasise the planking, while the top was finished in a dark grey-brown. However, as can be seen, the top didn't fit snugly into the frame as it has taken on a more acute angle. I couldn't see a way to glue this down, the contact patches are far to small. 

I fitted pairs of plastic fillet plates into the underside of the ridge, spaced to sit either side of two of the roof trusses. A 1mm hole through the plates allows a pin (paperclip wire) to pass through. 

With the top of the roof in place the wire pins pass under the peak of the trusses forming a strong mechanical fixing.

As you can see, this pulls the top into place neatly. In fact, no further fixing seems necessary, but I'll fix the pins with a blob of glue. 

I'm very pleased with how the station has come out, it has just the right blend of a grand facility of humble construction. It's well kept, but since locos run through it the ends and inside of the canopy and the roof glazing are smoke stained. 

Like the engine shed, a thin inner wall tidies up the back of the windows in case of a look under the canopy. The finials are rather vulnerable, one has been knocked off and refixed twice already!

Rail200 - lighting-up time

The last week or so, I've been working on getting the buildings completed so I can move on with the scenic work. However, this wasn't helped by a small diversion... I thought the platform looked a bit bare - it needs lamps! Cue some internet searching for something suitable, I didn't think the traditional gas lamps used on Hexworthy would look right. I found these swan-neck lamps from TrainSave (no I'd never heard of them!) on ebay, that looked perfect for the inter-war period.

They were easily fitted through holes drilled in the platform, the wires will need to go through holes in the baseboard and be connected up later. They use 12V bulbs, though I tested them on 9v which works well. 

With lamps on the open part of the platform, I had to do something under the canopy. I had some SMLEDs (I'd used them under the canopy on Hexworthy), but as the canopy is removable I couldn't fix them to the canopy. Instead, I superglued them to brackets made of scrap brass etch fret and stuck them to the wall.

With the station lit, the other buildings needed some lights too. I found these nice wall lamps from Model Railway Scenery - a 3 pack at a bargain price - perfect for the buildings around the yard. They use an SMLED, and are simply poked through a hole drilled in the wall with a dab of superglue from behind.

The weighbridge hut was already built, so I drilled a hole in the base behind the door (away from the window), and made up an SMLED stuck to another piece of scrap brass etch. This will poke up from below the baseboard (I hope, if the holes line up!).

The very fine wires that come attached to SMLEDs are impossible to secure into terminal blocks, and very difficult to poke through holes in the baseboard. I cut short lengths of single-core wire, stripped of insulation, and soldered them onto the already stripped ends of the wires. These will act like "needles" to thread them through the baseboard, then folded double should fix securely into terminal blocks. However, the priority is to install the buildings, wiring up and powering up will follow later!

Little jobs

With a couple of exhibitions last month, progress with the Rail200 challenge has been interrupted, but I have continued with the buildings when time allowed. There were some final additions to make.

I've had a Ratio boiler house kit in the stash for a long time, from a long forgotten project, so I thought I'd use the nice metal chimney on my boiler house. The base in the kit is stone, so I cut one from Wills brick but cut out the ash doors and fitted them into the brickwork. 

The base is sized to maximise chimney height within the limit. Really, a much taller (and more grand) chimney would be more appropriate, but won't fit, and I figured a chimney makes it look less like a goods shed. Perhaps it's for an auxiliary boiler? 

The Ratio boiler house also provided a sprue with "sleepers", which I used to make a small coaling stage just outside the engine shed. There were just enough sleepers! More Wills brick forms a low retaining wall around it. 

The inside of the rear wall of the engine shed will be visible, so I cut an inner wall from thinner Slater's brick to fit after installing the windows.

The engine shed and boiler house will use doors from the Wills engine shed, I thought for a while about how to fit them. The instructions suggested making wire loops as hinges, which sounds fiddly. I decided to drill 0.7mm holes in the top and bottom edge of the door, with a vertical wire to fit a hole in a lip behind the lintel and an L-shape wire at the bottom to fit in a hole in the side of the doorway. In theory, this will allow then to open and close - but if they can be fixed open I'll be happy. 

Floors for the buildings were cut from grey card, which I find an easy way to represent concrete. Paper templates were used, cut to the building shape then pressed onto the rails to mark their position.

Here's the boiler house floor in place with a 14mm wide strip between the rails. The underside of the edge of the outer pieces is chamfered slightly to sit low on the chairs, the surface needs to be below the rail top.

Finally, at Chatham I was looking for pre-nationalisation general purpose wagons for the layout. I thought the one in the Mainline box was a good deal, until I found another stand with 4 loose wagons for £10. They might need some touching-up, three are without coupling but I'd be changing them anyway, one even has compensation. The wagons will have to wait for attention though, painting of the buildings is now well underway and there is a lot to do to get the layout looking finished.