该项目是为全志 F1C100S/F1C200S 所编写的库函数，编写风格模仿 STM32 标准库，使得从 STM32 过来的人更容易上手。项目已经移植了 cherryusb、fatfs、lvgl、rt-thread。

BoloPi software code base on rtthread f1c100s

Buildroot Package for R3c ( F1C200s )

Launcher for M5Pi based on LVGL.

sinux f1 is a open hardware evalution board for F1c100s chip

Allwinner series board support based on buildroot-2023.02

Keychain shaped like Tux that can run Linux.

Buildroot Package for SINUX Boards

Open hardware board for Allwinner F1C100s/F1C200s processor with 32/64MB RAM, IO expansion and MicroSD storage

A System-on-Module with Allwinner F1C processor

The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF. This site documents how to build the firmware, flash it onto a board, and develop on top of it.

M5Pi is an open source Linux embedded development board, using Allwinner F1C200s CPU, and has a beautiful shell.

F1C200S PCB and SCH

Buildroot Package for F1C100s/200s

Excellent student embedded development study notes.

Super TINY & Low-cost Linux Develop-Kit Based On F1C200s.